Oki MICROLINE 8810 User Manual

Microline 8810 User’s Guide
62
PE Adj. [Paper End Adjust]
For fine tuning the location of the last line of printing (Paper End)
for a specific paper feed path. See below for a list of paper feed
paths.
Settable from -15 to +15 in increments of 1/144-inch. The
default is 0.
Negative values allow printing further down on the form.
• Paper End moves down
•paper moves up.
Positive values stop the printing further up on the form.
•Paper End moves up
•paper moves down
Paper Feed Paths
•PE Adj. (Cut)
Applies to sheets fed manually through the platform.
• PE Adj. (CSFF)
Applies to sheets fed through the optional CSF mounted on
the front of the printer.
• PE Adj. (CSFR)
Applies to sheets fed through the optional CSF mounted on
the rear of the printer.
•PE Adj. (Front)
Applies to continuous forms fed through the front tractor.
•PE Adj. (Rear)
Applies to continuous forms fed through the optional Rear
Push Tractor.
PE Pos. [Paper End Position]
This sets when the the printer will move to the next continuous
form, based on the distance between the center of the
characters on the last line of the form and the bottom of the
form. Available settings: 3.18 mm (1/8") or 6.35 mm (1/4")
[the default].

Oki MICROLINE 8810 Specifications

General

Color	No
Built-in barcodes	EAN13, PostNet, UPC-A, UPC-E
Maximum number of copies	8 copies
Fonts included	5
Media thickness	0.48 mm
Dimensions (WxDxH)	598 x 397 x 235 mm
Power requirements	120V-240V (±10%, 50Hz/60Hz)
Connectivity technology	Wired
Compatible operating systems	Windows Vista 32/64, XP, 2000, 98, NT 4.0, 2003 Server
Print direction	Bi-directional
Maximum duty cycle	24000 pages per month
Mean time between failures (MTBF)	10000 h
Sound pressure level (printing)	55.5 dB
Power consumption (standby)	25 W
Power consumption (typical)	120 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	30 - 85 %