Oki MPS5502 - Page 311

45641001TH Rev.1
11-13 /
Oki Data CONFIDENTIAL
05/
08
Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce-
dure
05 Adjustment
mode
Image
Processing
Density
adjustment
FAX(black) Manual
adjustment/
Center value
7533 Text/Photo 128 0-255 SYS Thelargerthevalue,thedarkertheimageat the
center value becomes.
1
05
Adjustment
mode
Image
Processing
Density
adjustment
FAX(black) Manual
adjustment/
Center value
7534 Text 128 0-255 SYS Thelargerthevalue,thelightertheimageat the
center value becomes.
1
05
Adjustment
mode
Image
Processing
Density
adjustment
FAX(black) Manual
adjustment/
Center value
7535 Photo 128 0-255 SYS Thelargerthevalue,thedarkertheimageat the
center value becomes.
1
05
Adjustment
mode
Image
Processing
Density
adjustment
FAX(black) Automatic
density
adjustment
7542 Text/Photo 128 0-255 SYS Thelargerthevalue,thedarkertheimage
becomes.
1
05
Adjustment
mode
Image
Processing
Density
adjustment
FAX(black) Automatic
density
adjustment
7543 Photo 128 0-255 SYS Thelargerthevalue,thedarkertheimage
becomes.
1
05
Adjustment
mode
Image
Processing
Blank page
judgment
threshold
adjustment
7618 PPC/SCN 128 0-255 SYS Thelargerthevalue,themoretheoriginaltends
to be judgedasablank page.
1
05
Adjustment
mode
Image
Processing
ACS
judgment
threshold
7630 PPC/SCN 70 0-255 SYS Thelargerthevalue,themoretheoriginaltends
to be judgedasblackevenintheautocolor
mode.
Thesmallervalue,themoreittendstobejudged
as color.
1
05
Adjustment
mode
Image
Processing
Stroke
adjustment
PS/PDF automatic
stroke adjustment
600dpi 8239 0 Default setting 1 0-3 SYS This code is used to change the width of fine
lines in PS and PDF printing. Automatic stroke
adjustment is the function that prevents the width
from changing according to the position.
This code sets whether automatic stroke
adjustment is enabled or disabled if it is not
included in the print data.Ifthissettingisdisabled,
there will be an increase in cases in which the
width of fine lines becomes thicker by 1 dot when
they are printed.
0: Disabled
1: Enabled
2: Forcibly disabled (Ignores command in printing
data)
3: Forcibly enabled (Ignores command in printing
data)
4