Oki MPS5502 - Page 312

45641001TH Rev.1
11-14 /
Oki Data CONFIDENTIAL
05/
08
Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce-
dure
05 Adjustment
mode
Image
Processing
Stroke
adjustment
PS/PDF automatic
stroke adjustment
600dpi 8239 1 Minimum stroke
width when
disabled
1 1-2 SYS This code is used to change the width of fine
lines in PS and PDF printing. Automatic stroke
adjustment is the function that prevents the width
from changing according to the position.
This code sets the minimum width of fine lines
when theautomaticstrokeadjustmentisdisabled.
For example,ifautomaticstrokeadjustmentis
disabled andthewidthofnelinesissetto“0”in
the PS command,thewidthofthelinesbecomes
1 dot if the valueofthiscodeissetto“1”;equally,
if it is set to “2”, the width of the lines becomes 2
dots.
1: 1 dot
2: 2 dots
4
05
Adjustment
mode
Image
Processing
Stroke
adjustment
PS/PDF automatic
stroke adjustment
1200dpi 8239 2 Default setting 1 0-3 SYS This code is used to change the width of fine
lines in PS and PDF printing. Automatic stroke
adjustment is the function that prevents the width
from changing according to the position.
This code sets whether automatic stroke
adjustment is enabled or disabled if it is not
included in the print data.Ifthissettingisdisabled,
there will be an increase in cases in which the
width of fine lines becomes thicker by 1 dot when
they are printed.
0: Disabled
1: Enabled
2: Forcibly disabled (Ignores command in printing
data)
3: Forcibly enabled (Ignores command in printing
data)
4
05
Adjustment
mode
Image
Processing
Stroke
adjustment
PS/PDF automatic
stroke adjustment
1200dpi 8239 3 Minimum stroke
width when
disabled
1 1-2 SYS This code is used to change the width of fine
lines in PS and PDF printing. Automatic stroke
adjustment is the function that prevents the width
from changing according to the position.
This code sets the minimum width of fine lines
when theautomaticstrokeadjustmentisdisabled.
For example,ifautomaticstrokeadjustmentis
disabled andthewidthofnelinesissetto“0”in
the PS command,thewidthofthelinesbecomes
1 dot if the valueofthiscodeissetto“1”;equally,
if it is set to “2”, the width of the lines becomes 2
dots.
1: 1 dot
2: 2 dots
4