45641001TH Rev.1
11-62 /
Oki Data CONFIDENTIAL
05/
08
Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce-
dure
08 Setting
Mode
System Network Retention period 9193 Webdataretention
period
10 0-999 SYS Whenacertainperiodoftimehaspassedwithout
operationafteraccessingWebPage,thedatabeing
registered is automatically reset. This period is set at this
code.
(Unit: minute)
1
08 Setting
Mode
System Network Retention period 9200 File retention
period
30 0-999 SYS 0: No limits
1 to 999: 1 to 999 days
1
08 Setting
Mode
System Network E-mail 9201 Max. size in email/
InternetFAX
transmission
30 2-100 SYS 2 to 100 M bytes 1
08 Setting
mode
System Electronic
filing
9203 e-Filing document
guarantee mode
1 0-1 SYS Sets the file retention level during edition in e-Filing
(when the document cut/save command is used)
0:Notretained(DocumentscouldbelostduetoWe
session timeout / electricity cutoff during document cut/
save.)
1: Full retained - Documents are retained until cut/save
command completion.
When“1”isset,documentsarenotlostevenifdiskfull
occurs during command execution.
1
08 Setting
mode
System User
interface
Whenjudgingas
black in the ACS
Mode
9204 Binarizing level
selection
3 1-5 SYS 1: Step -2
2: Step -1
3: Step 0 (center)
4: Step 1
5: Step 2
Thebinarizinglevelofeachstepissetat08-9230.
1
08 Setting
mode
System Electronic
filing
9207 Default setting of
user box retention
period
0 0-999 SYS Sets the data retention period when creating a user box.
0: Not deleted
1 to 999: Retention period (Unit: Day)
1
08 Setting
Mode
System HDD 9208 Warning
notification- File
Share/e-Filling
90 0-100 SYS Sets the percentage of HDD partition filled when warning
notification is sent.
0 to 100: 0 to 100%
* Checks the remaining amount of HDD with the
searchingintervalsetat08-9225.
1
08 Setting
mode
System Scanning E-mail 9209 Notification setting
of E-mail saving
time limit
3 0-99 SYS Sets the days left the notification of E-mail saving time
limit appears
0 to 99: 0 to 99 days
1
08 Setting
mode
System Scanning E-mail 9210 Default setting of
partial size when
transmitting E-mail
0 0-6 SYS Sets the default value for the partial size of E-mail to be
transmitted when creating a template.
0: Not divided
1:642:128
3: 256 4: 512
5: 1024
6:2048(Unit:KB)
1