Control Elements 25
Before you can use the control unit you have to place a proper Power Pack into the designated Slot for
Power Pack. Then push the power on/off button of the Power Pack.
All the functions are controlled by the Multi-function control knob or by using the touch capabilities
of the display. To operate the device, rotate the knob to the desired function and push down on the knob
to select. Alternatively you simply tip with your finger onto an item on the screen.
If you do not want to use wireless headphones you can also plug in common wired headphones with a
phone jack into the Headphone socket. Additionally you will hear any sounds directly through the
internal speaker, if not disabled.
Via USB port a common USB stick can plugged in into the control unit to copy the stored scan images
to another computer for further evaluation with the Visualizer 3D software program or to update the
internal firmware if necessary.
The HDMI port can be used to connect HDMI video eye glasses. Another way to connect goggles is to
use wireless Android video eye glasses (see section 5.5 “Connecting Android devices (Video eye glasses
or Tablet PCs)” on page 32).
The carrying strap is used to carry the control unit around your neck. Additionally you may use the
belt strap to fix the control unit to your body.
Please make sure that the air ventilation is not covered at any time during the operation of the
eXp 6000 control unit. If the air can not circulate properly the control unit may overheat.
OKM GmbH
www.okmmetaldetectors.com
To Next Page
Loading...
