The system consists of:
▪ a central controller for collecting readings and managing alarms;
▪ various addressable digital modules (sensor modules, relay modules, analog output modules,
logic input modules);
▪ instruments and accessories to process alarms and actions
The CPS system can manage the detection of 10 different gases, and all detectors are clearly
localized and identified.
Data from each sensor is collected in the central controller in less than one second. If gas levels
exceed the programmed limits, an audiovisual alarm is triggered and can activate the ventilation
system in the affected area of the parking facility.
Use the COM_CPS software to program the central controller.
The system status can be quickly verified with semi-automatic calibration for various sensors.
To Next Page
Loading...
Need help?
General
