2-12 d-COLOR P3100
Preparation for printing (USB connection)
2
2.2
Installation procedure
Install the printer driver using the installer.
0 Administrator privileges are required to perform this task.
0 Use the Driver & Utilities CD/DVD-ROM.
1 Connect a USB cable to the USB port of this machine.
% For details on the cable connection port, refer to page 1-4.
% If a wizard window for adding new hardware opens, click [Cancel].
2 Insert the printer driver CD/DVD-ROM into the CD/DVD-ROM drive of the computer.
% Make sure that the installer starts, then go to Step 3.
% If the installer does not start, open the printer driver folder on the CD/DVD-ROM, double-click [Set-
up.exe], then go to Step 4.
% If the [User Account Control] window appears, click [Continue] or [Yes].
3 Click [Printer].
4 Read the license agreement, then click [AGREE].
5 Check the contents of the [Readme] window, then click [Next].
6 Select [Install printers/MFPs], then click [Next].
USB-connected printers are detected.
7 Select this machine, then click [Next].
8 Select the check box of the printer driver you want to install, then click [Next].
% For features of each printer driver, refer to page 2-5.
9 Check the components to be installed, then click [Install].
10 If necessary, change the printer name or print a test page, then click [Finish].
Installation of the printer driver is then completed.
dReference
When you finish installing the printer driver, configure the default settings of the printer driver. For details, refer
to page 2-13.
Settings Description
[Review] Displays the installed components for checking.
[Rename Printer] Changes this machine name, if necessary.
[Property] Sets the optional operating environment of this machine. For details, refer
to page 2-8.
[Print Setting] Changes the default print settings of this machine, if necessary. For de-
tails, refer to page 2-8.
[Print Test page] If necessary, print a test page to check that printing process works cor-
rectly.
To Next Page
Loading...
Need help?
General