d-COLOR P3100 3-3
3.1 Preparation for printing (Bonjour connection)
3
3 Printing in the Mac OS Environment
3.1 Preparation for printing (Bonjour connection)
3.1.1 Overview
Before using this machine as a printer, you need to install the printer driver on your computer and add the
printer to your computer.
This section describes preparations required to carry out printing on this machine by Bonjour (Rendezvous)
connection that is supported in Mac OS X 10.3 or later.
- The Bonjour technology enables you to configure the network settings for networked devices and find
and use services without the need for configuring special settings.
- In Mac OS X 10.3, Bonjour is called Rendezvous.
3.1.2 Before setting up the computer (for administrators)
Connecting this machine to the network
Checking a LAN cable for connection
Configuring the Bonjour settings
Enabling Bonjour
Setting a printer name (Bonjour name)
% Enter the name of this machine to be displayed as the name of a connected device.
Preparation finished
Checking a LAN cable for connection
Check that a LAN cable is connected to the LAN port of this machine.
For details on the cable connection port, refer to page 1-4.
Configuring the Bonjour settings
Enable Bonjour. (You can use this function with the default settings unless otherwise requested.) In addition,
enter the name of this machine (Bonjour name) to be displayed as the name of a connected device.
For details on how to configure settings, refer to [User's Guide Applied Functions].
To Next Page
Loading...
Need help?
General