8-8
Job Accounting > Setting an Account
Deleting an Account
This deletes the account.
1
Display the screen.
1 Press the [Status/System Menu/Counter] key.
2 Press the [▲] or [▼] key to select [Admin/Accounting], and press the [OK] key.
3 Press the [▲] or [▼] key to select [Job Account. Set.], and press the [OK] key.
4 Press the [▲] or [▼] key to select [Account. List], and press the [OK] key.
2
Delete an account.
1 Press the [▲] or [▼] key to select the account you want to delete and press the [OK] key.
2 Press the [▲] or [▼] key to select [Delete], and press the [OK] key.
3 Press the [▲] or [▼] key to select [Yes] in the confirmation screen, and press the [OK] key.
The account is deleted.
If the login user name entry screen appears during operations, log in by referring to
Administrator User Name and Password
on page 2-20.
The factory default login user name and login password are set as shown below.
Status/Sys. Menu
Admin/Accounting
Login User Name Login Password
Admin
*1
*1 Upper case and lower case letters are distinguished (case sensitive).
Admin
*1