5-30
Operation on the Machine > Scanning
Scanning
You can scan originals using the machine and save the scanned images on your computer.
The following three types of scan are available.
Scan the Image to the Specified Destination
Use the Preset Scan Destination
If originals are scanned after selecting [Local PC] as the destination, an image is saved in "My Documents" in the
computer (Host PC) connected to the machine via USB. If Client Tool is activated on the Host PC, originals can
be scanned only by operating the machine.
Use Your Desired Destination
When saving an image in a location other than "My Documents", the destination needs to be set beforehand by
using Client Tool. If the shared folder in the computer (Client PC) on the network is selected for the destination, an
image can be saved on the computer that is not connected to the machine via USB.
Scan the originals at the machine.
(Refer to Scan the Image to the
Specified Destination on page 5-
32.)
1
An image is saved in "My
Documents."
2
Host PC
USB
Scan the originals at the machine.
(Refer to Use Your Desired
Destination on page 5-33.)
2
An image is saved in the
folder set by Client Tool.
Preset the destination by using
Client Tool. (Refer to Default
Settings on the PC
( Client Tool) on page 7-
16.)
1
Client PC
USB Network
Network
Host PC
USB
To Next Page
Loading...
Need help?
General
