9-2
Troubleshooting > Regular Maintenance
Regular Maintenance
Cleaning
Clean the machine regularly to ensure optimum printing quality.
Original Cover/Glass Platen
Wipe the backside of the original cover, the inside of the document processor and the glass platen with a soft cloth
dampened with alcohol or mild detergent.
Slit Glass
When using the document processor, clean the slit glass surface and the reading guide with the dry accessory cloth. Dirt
on the slit glass or the reading guide may cause black streaks to appear in the output.
1
2
For safety, always unplug the power cord before cleaning the machine.
Do not use thinner or other organic solvents.
Do not use water, soap or solvents for cleaning.
To Next Page
Loading...
Need help?
General
