3-10
Preparation before Use > Loading Paper
Loading Paper in the Multi Purpose Tray
The multi purpose tray will hold up to 100 sheets of A4 or smaller plain paper (80 g/m²) or up to 25 sheets of plain paper
(80 g/m²) lager than A4.
The multi purpose tray accepts paper sizes from A3 to A6-R and Hagaki and from Ledger to Statement-R, 8K, 16K and
16K-R. Be sure to use the multi purpose tray when you print on any special paper.
The capacity of the multi purpose tray is as follows.
• A4 or smaller plain paper (80 g/m²), recycled paper or color paper: 100 sheets
• B4 or larger plain paper (80 g/m²), recycled paper or color paper: 25 sheets
• Hagaki: 15 sheets
• OHP film: 25 sheets
• Envelope DL, Envelope C4, Envelope C5, Envelope #10, Envelope #9, Envelope #6, Monarch, Youkei 4, Youkei 2:
5 sheets
1
Open the multi purpose tray.
Pull out the MP tray extension to match the paper size. Refer to the label which sealed inside
the machine when opening the MP tray.
• When using media types other than plain paper (such as recycled or colored paper), always specify the
me
dia type and paper weight settings.
Specifying Paper Size and Media Type for the Multi Purpose Tray (MP Tray Setting) (page 3-15)
Media Type Set. (Media Type Settings) (page 7-10)
• If you are using a paper weight of 106 g/m² or more, set the media type to Thick and set the weight of the
p
aper you are using.
• When you load custom size paper, enter the paper size by referring to Specifying Paper Size and Media Type for the
Multi Purpose Tray (MP Tray Setting) on page 3-15.
• When you use special paper such as transparencies or thick paper, select the media type by referring to Spec
ifying
Paper Size and Media Type for the Multi Purpose Tray (MP Tray Setting) on page 3-15.
To Next Page
Loading...
Need help?
General
