Olivetti d-COPIA5514MF User Manual

2-54
Installing and Setting up the Machine > Embedded Web Server RX
Acc
essing Embedded Web Server RX
1
Display the screen.
1 Launch your Web browser.
2 In the address or location bar, enter the machine's IP address or the host name.
Click in the following order to check the machine's IP address and the host name.
[Device Information] in the home screen > [Identification/Network]
Examples: https://192.168.48.21/ (for IP address)
https://MFP001 (if the host name is "MFP001")
The web page displays basic information about the machine and Embedded Web Server RX
as well
as their current status.
2
Configure the function.
Select a category from the navigation bar on the left of the screen.
NOTE
If the screen "There is a problem with this website's security certificate." is displayed,
configure the certificate.
Embedded Web Server RX User Guide
You can also continue the operation without configuring the certificate.
NOTE
To fully access the features of the Embedded Web Server RX pages, enter the User Name and
Password an
d click [Login]. Entering the predefined administrator password allows the user to
access all pages, including Document Box, Address Book, and Settings on the navigation menu.
The factory default setting for the default user with administrator privileges is shown below.
(Upper case and lower case letters are distinguished (case sensitive).)
Login User Name: Admin
Login Password: Admin

Olivetti d-COPIA5514MF Specifications

General

Brand	Olivetti
Model	d-COPIA5514MF
Category	All in One Printer
Language	English