5-32
Operation on the Machine > Sending
Scanning using TWAIN or WIA
This section explains how to scan an original using TWAIN. The WIA driver is used in the same way.
1
Display the screen.
1 Activate the TWAIN compatible application software.
2 Select the machine using the application and display the dialog box.
2
Configure the scan settings.
Select scanning settings in the dialog box that opens.
3
Place the originals.
4
Scan the originals.
Click the [Scan] button. The document data is scanned.
For selecting the machine, see the Operation Guide or Help for each application
software.
For the settings, refer to Help in the dialog box.
Loading Originals (page 5-2)
To Next Page
Loading...
Need help?
General
