9-21
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
2 [User Login Setting] > [Group Authorization] > [Group List] > []
2
Configure the settings.
1 Enter the group ID > [Next]
2 Enter the group name > [Next]
3 Select the group access privileges > [Next]
4 Check the settings and change or add information as needed.
3
Register the group.
Select [Save].
A new group is added on the group list.
For details on entering characters, refer to the the following:
Character Entry Method (page 11-11)
Group Authorization Set. - Group List
10:10System Menu/Counter.
Others
Menu
1/1
End
To Next Page
Loading...
