11-10
Appendix > Optional Equipment
Checking Details of Application
Use the procedure below to check the details of application.
1 [System Menu/Counter] key > [System/Network] > [Optional Function]
2 Select the desired application and select [ ].
You can view detailed information on the selected application.
The table below lists the item you can view.
Extend the trial period.
[Extend] > [Yes]
The trial period is extended.
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
d-COPIA 4513MF plus d-COPIA 5514MF d-COPIA 6014MF
d-COPIA 4514MF plus
5500 6000
Login User Name: 4500
Login Password: 4500
5500 6000
Item
Function Name
License
Remaining Counts
Expiration Date
Status
To Next Page
Loading...
Need help?
General
