Olympus TomoScan FOCUS LT - 2 System Installation; Standard Equipment; Instrument Installation

To Next Page

To Previous Page

DMTA041-01EN [U8778479], Rev. C, May 2014

System Installation

2. System Installation

This chapter explains the procedures for installing the TomoScan FOCUS LT and for

connecting the system components and peripherals to the main instrument.

2.1 Standard Equipment

The packing list should include the following items:

• TomoScan FOCUS LT with the proper internal configuration

• AC power cord

• Crossover Ethernet cable (category 5e or higher)

• USB drive including the TomoView installation software, TomoView user’s

manual, and TomoScan FOCUS LT user’s manual

• Calibration certificate

• Probe adaptor (optional item)

2.2 Instrument Installation

This section provides installation instructions for the TomoScan FOCUS LT (see

Figure 2-1 on page 26).