DMTA041-01EN [U8778479], Rev. C, May 2014
Connector References
59
6. Connector References
This chapter presents the technical description of the TomoScan FOCUS LT front
panel connectors. For each connector, you will find the following information: a brief
description, the manufacturer number, the number of the corresponding cable
connector, an illustration, and a table giving the specifications or the signal pinouts
for the connector. The following connectors are presented according to their location
on the front panel, from left to right:
•
I/O connector
•
DC OUT connector
•
DC IN connector
•
ETHERNET connector
•
P connectors
•
UT PHASED ARRAY connector
To Next Page
Loading...