Olympus TomoScan FOCUS LT - Specifications of Models FLT3232-P-O and FLT6464-P-O; Table 10 Specifications of Models FLT3232-P-O and FLT6464-P-O

DMTA041-01EN [U8778479], Rev. C, May 2014
Specifications 51
5.2.1.4 Specifications of Models FLT3232-P-O and FLT6464-P-O
Beam
forming
Scan type Azimuthal and linear
Active elements Up to 64
Total number of elements 128
Delay-range transmission 0–10 µs, steps of 2.5 ns
Delay-range reception 0–10 µs, steps of 2.5 ns
Dynamic depth focusing
(DDF)
Yes
Table 10 Specifications of models FLT3232-P-O and FLT6464-P-O
Category Specification FLT3232-P-O FLT6464-P-O
Pulser Pulse voltage 50 V, 100 V, and 200 V, ±10 % (in high impedance)
Pulse width 30 ns to 500 ns, in steps of 2.5 ns,
precision 5 ns or ±10 %
Pulse shape Negative square pulse
Fall time < 15 ns
Output impedance < 4 Ω
Table 9 Specifications of models FLT64128-P-O and FLT64128-R-O (continued)
Category Specification FLT64128-P-O FLT64128-R-O