Olympus TomoScan FOCUS LT - Specifications of Models FLT32128-P-O and FLT32128-R-O; Table 8 Specifications of Models FLT32128-P-O and FLT32128-R-O

DMTA041-01EN [U8778479], Rev. C, May 2014
Specifications 47
5.2.1.2 Specifications of Models FLT32128-P-O and FLT32128-R-O
Beam
forming
Scan type Azimuthal and linear
Active elements Up to 16
Total number of elements 128
Delay-range transmission 0–10 µs, steps of 2.5 ns
Delay-range reception 0–10 µs, steps of 2.5 ns
Dynamic depth focusing
(DDF)
Yes
Table 8 Specifications of models FLT32128-P-O and FLT32128-R-O
Category Specification FLT32128-P-O FLT32128-R-O
Pulser Pulse voltage 40 V, 80 V, and 115 V, ±10 % (in high impedance)
Pulse width 30 ns to 500 ns, in steps of 2.5 ns,
precision of 5 ns or ±10 %
Pulse shape Negative square pulse
Fall time < 15 ns
Output impedance < 15 Ω < 48 Ω
Table 7 Specifications of models FLT16128-P-O and FLT16128-R-O (continued)
Category Specification FLT16128-P-O FLT16128-R-O