32
Low Battery – If the 9V battery lowers to about 7V, the iServer will prompt an alarm.
Relay 1 Activated – If relay 1 is activated the iServer will prompt an alarm.
See Alarm Relays section under the Configuration page (Section 4.4.3.4).
Relay 2 Activated – If relay 2 is activated the iServer will prompt an alarm.
See Alarm Relays section under the Configuration page (Section 4.4.3.4).
4.4.5 Security
This page provides security and access settings for the iServer. Fields are described
below.
http://192.168.1.200Address
Security
Readings
Chart
Web Link Setup
Overview
Network
Configuration
Management
Security
Recording
System
Diagnostics
Log Out
Save Changes Reset
Login Password
Admin Password
Local Port Password
Telnet Console Access
Web Server Access
Secured Readings and Charts
Change
Change
Change
IP Exclusivity
12345678
00000000
1
2
3
4
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Enable
No
IP Address
Figure 4.21 Security Menu