Omega MICROMEGA CN77000 series - Page 76

part
3
O PERATION : C ONFIGURATION M ODE
Communication Option cont.
Display Action Response
MODE SUBMENU:
Press ENTER 23) Display flashes previous selection for "Mode".
Press MAX 24) Scroll through the available selections: CMND, CONT (command, continuous).
Press ENTER 25) Display flashes
"
strd
" message and advances to "Separation" submenu.
SEPARATION SUBMENU:
Press ENTER 26) Display flashes previous selection for "Separation".
Press MAX 27) Scroll through the available selections: SPCE, CR (space, carriage return).
Press ENTER 28) Display flashes
"
strd
" message and advances to "Data Format" submenu.
DATA FORMAT SUBMENU:
Display shows
"
data frMt
" prompt. This menu is applicable for continuous mode of
RS-232 communication.
Press ENTER 32) Display advances to "Status" submenu.
The Data Format options determine what readings and values will be returned in the data string sent from the unit either when
operating in Continuous Mode or when receiving a Send-Data-String request via the serial port.
DATA
FRMT
SEPR
SPCE
MoDE
CMD
_
Note
☞
68