Omega MICROMEGA CN77000 series User Manual

part
3
O PERATION : C ONFIGURATION M ODE
70
Communication Option cont.
Display Action Response
UNIT SUBMENU:
Press ENTER 45) Display flashes previous selection for
"Unit".
Press MAX 46) Scroll through the available selections: NO, YES.
Press ENTER 47) Display flashes
"
strd
" message and advances to "ID" submenu.
ID SUBMENU: NOT INSTALLED
Press ENTER 48) Display flashes previous selection for
"ID".
Press MAX 49) Scroll through the available selections: NO, YES.
Press ENTER 50) Display flashes
"
strd
" message and advances to "Address Setup" submenu.
ADDRESS SETUP SUBMENU: .
Display shows
"
addr st.up
" prompt. This menu is applicable to the RS-485 option only.
Press ENTER 51) Display advances to
"Address Value" (0000 to 0199) submenu.
ADDRESS VALUE SUBMENU:
Press ENTER 52) Display flashes 1st digit of previous address value.
Press MAX & MIN 53) Enter new address value.
Press ENTER 54) Display flashes
"
strd
" message and advances to "Transmit Time" submenu.
If no change press ÒMenuÓ to go on.
ADDR
0000
ADDR
ST.UP
ID
_
no
_
UNIT
_
YES

Omega MICROMEGA CN77000 series Specifications

General

Brand	Omega
Model	MICROMEGA CN77000 series
Category	Controller
Language	English