Remote Setpoint Option cont.
Display Action Response
Press MENU 1) Press MENU, if necessary, until the "
r.set p0nt
" prompt appears.
Press ENTER 2) Display advances to
"Remote Setpoint 1" submenu.
IF THE REMOTE SETPOINT IS NOT INSTALLED, THE CONTROLLER WILL SHOW
"NOT INSTALLED".
Press MENU Press MENU, if you receive the "Not Installed" message.
REMOTE SETPOINT 1 SUBMENU:
Press ENTER 3) Display flashes 1st digit of previous selection for
"Remote Setpoint 1" value.
Press MAX & MIN 4) Enter a new
"Remote Setpoint 1" value.
Press ENTER 5) Display flashes
"
strd
" message and advances to "Remote Setpoint 2" submenu.
REMOTE SETPOINT 2 SUBMENU:
Press ENTER 6) Display flashes 1st digit of previous selection for
"Remote Setpoint 2" value.
Press MAX & MIN 7) Enter a new
"Remote Setpoint 2" value.
Press ENTER 8) Display flashes
"
strd
" message and advances to "Remote Setpoint 3" submenu.
R.SP.2
375.0
R.SP.1
470.0
n0t
_
INST
R.SET
p0nt
O
PERATION
: C
ONFIGURATION
M
ODE
part
3
89
To Next Page
Loading...
