Need help?Do you have a question about the Omega PLATINUM Series and is the answer not in the manual?
General| Protection Class | IP20 |
|---|---|
| Input Type | Thermocouple, RTD, Process |
| Output Type | Relay, SSR |
| Control Mode | ON/OFF, PID |
| Display Type | LED |
| Power Supply | 100-240V AC, 24V DC |
| Communication | RS-485 |
| Input Voltage | 0 to 10 VDC |
| Output Voltage | 0 to 10 VDC |
| Operating Temperature | 0-50°C |
| Sampling Rate | 100ms |
Provides an overview of the PLATINUM™ Series Controller's capabilities and features.
Explains how to navigate the manual, referencing key sections and their content.
Guidelines for managing electromagnetic compatibility during installation and use.
Details the layout and connections on the back panel of the PLATINUM™ Series controllers.
Instructions for connecting the main power supply to the controller unit.
Information on how to connect various sensors and signals to the input connector.
Guidance on configuring and connecting the controller's output channels.
Explains the function of each button for navigating the controller's interface.
Describes the hierarchical organization of the controller's menu system.
Details the three main Level 1 menu groups: Initialization, Programming, and Operating.
Illustrates how to navigate through menus using the LEFT and RIGHT buttons.
Detailed mapping of the Initialization Mode menu navigation and parameters.
Detailed mapping of the Programming Mode menu navigation and parameters.
Detailed mapping of the Operating Mode menu navigation and functions.
To Next Page
