Chart:
In this section you can optimize the size of the text fonts and the
thickness of the measurement traces in the exported chart .
Further on, you can enable the inclusion of the chart legend and
the cursor grid. In addition the position of the cursor grid in the
exported chart and the image file format can be defined.
Data:
In this section you can choose the decimal separator and the
field separator for the clipboard export.
Find more information in 11.1.2 Use the clipboard functions to
export data on page 109.
In this section you can define several parameters for the CSV-
Export, Excel-Export and Touchstone-Export of the measured
data. These parameters are the default values that will be used for
all future exports you perform.
Find out more in 11.1.4 Exporting measurement data to CSV or
Excel files on page 113.
Here you can choose if comments, the cursor table, the chart
legend or shaped level are included in the report or not.
Additionally, you can choose if you want to use a custom report or
the standard report. Finally you can select if the report should be
opened after its generation and the program that should be used
to display the report.
Detailed information is available in 11.1.6 Generate a PDF
report on page 116.
Bode Analyzer Suite introduction
OMICRON Lab
33
To Next Page
Loading...
