Grounding terminal
Swiveling mounting brackets for TESTRANO 600
(top) and CP TD1 (bottom).
To secure TESTRANO 600 while pulling the
trolley, a safety belt is available (not shown).
Data cable TESTRANO 600 ⇔ CP TD1 (short
type). Via this data cable, the TESTRANO 600
software controls the CP TD1.
CP TD1’s measuring inputs IN A and IN B,
connected to the cable drum for the measuring
cables.
Equipment trolley
Booster cable TESTRANO 600 ⇔ CP TD1.
Via this cable TESTRANO 600 controls the
CP TD1 output voltage.
TESTRANO 600
CP TD1
TESTRANO 600, CP TD1 and the equipment
trolley connected to the trolley’s grounding bar
and led to earth.
Grounding cable min. 6mm².
Cable drum with double-
shielded output cable to
feed the high voltage to
the test object.
High-voltage
output.
Cable drum for
measuring
cables
To Next Page
Loading...
Need help?
General
