Omicron CP TD1 User Manual

OMICRON 5
About this manual
About this manual
This User Manual provides information on how to use the CP TD1 test system safely, properly and
efficiently. The CP TD1 User Manual contains important safety rules for working with the CP TD1 and
gets you familiar with operating the CP TD1. Following the instructions in this User Manual will help you
to prevent danger, repair costs, and avoid possible down time due to incorrect operation.
The CP TD1 User Manual always has to be available on the site where the CP TD1 is used. The users
of the CP TD1 must read this manual before operating the CP TD1 and observe the safety, installation,
and operation instructions therein.
Reading the CP TD1 User Manual alone does not release you from the duty to comply with all national
and international safety regulations relevant to working on high-voltage equipment.
Safety symbols used
In this manual, the following symbols indicate safety instructions for avoiding hazards.
DANGER
Death or severe injury will occur if the appropriate safety instructions are not observed.
WARNING
Death or severe injury can occur if the appropriate safety instructions are not observed.
CAUTION
Minor or moderate injury may occur if the appropriate safety instructions are not
observed.
NOTICE
Equipment damage or loss of data possible

Omicron CP TD1 Specifications

General

Brand	Omicron
Model	CP TD1
Category	Measuring Instruments
Language	English