Omnitracs MCP110 - Wired Panic Button Installation; Wired Panic Button Overview; Installing the Panic Button; Installation Verification

80-JB400-1 Rev. D 15-1
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
15
Wired Panic Button Installation
Wired Panic Button Overview
The wired panic button meets all Defense Transportation Tracking System (DTTS)
requirements and can be used for vehicles hauling U.S. Department of Defense loads or
hazardous materials.
It can be configured at the NMC to function as a non-DTTS panic button. When this
configuration is used, the panic button sends an alert to the NMC and an Emergency
notification to the dispatcher, but DTTS is not notified.
For information on installing the wireless panic button, see chapter Chapter 16: Wireless
Panic Button Installation.
Installing the Panic Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-2
Installation Verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-4
For technical questions, contact Omnitracs Customer Support. Customer Support is staffed
24 hours a day, 365 days a year:
In the United States, call 800-541-7490
In Canada, call 800-863-919180-JB400-1 Rev. D