14 Serial Communications
14-16
CP1E CPU Unit Software User’s Manual(W480)
PLC Setup
Click the Serial Option Port Tab in the PLC Settings Dialog Box.
Serial Option Port Tab Page
Parameter Settings
Communications
Settings
Set the Modbus communications settings to match those of the
Inverter.
If the Inverter is set to 9,600 bps, one stop bit, and even parity, select
the Custom Option and set the baud rate to 9,600.
Set the format to 8,1,E.
Mode Select Modbus Easy Master.
Response Timeout Set the default value of 0×100 ms.
To Next Page
Loading...
