Omron CP1E CPU UNIT SOFTWARE - Settings; Ethernet Option Board Setup

17-11
17 Ethernet Option Board
CP1E CPU Unit Software User’s Manual(W480)
17-3 Settings
17
17-3-1 Ethernet Option Board Setup
17-3 Settings
The Ethernet Option Board’s system settings can be set using the Web browser of a personal computer
or other devices connected with Ethernet. The setting values are saved in the Ethernet Option Board’s
EEPROM.
The settings will be read from the allocated words when the power of the CP1E CPU Unit is turned ON
again.
Additional Information
If the Ethernet Option Board’s IP address cannot be set by the Web browser function, it can be
set in the IP address display/setting area (D1355 and D1356) in the allocated words in the DM
area.
17-3-1 Ethernet Option Board Setup
CP1E N/NA
CPU Unit
Web browser of Internet Explorer
Connect to the Ethernet Option Board from
the Web browser using the Ethernet Option
Board’s IP address
http://192.168.250.1/E00.htm
Ethernet
Set the system settings from the Web Browser.
* Use the default settings 192.168.250.1
in this example.
Hub
The setting values are saved
in the EEPROM.
IP ADDRESS:
SUBNET MASK:
COMMERR
10BASE-T
100BASE-TX
EEPROM
Ethernet Option Board