Omron CP1E CPU UNIT SOFTWARE - Specifications; Software Configuration

17-5
17 Ethernet Option Board
CP1E CPU Unit Software User’s Manual(W480)
17-1 Features and Specifications
17
17-1-3 Specifications
The software supported by the Ethernet Option Board runs in the layers shown in the following diagram.
It is necessary to set the communications settings before connecting the Ethernet Option Board to the
CP1E CPU Unit by the Host Link protocol. Refer to Serial Communications Settings of the Option Board
in section 17-2-1.
17-1-3 Specifications
Item Specifications
Name CP-series Etherent Option Board
Model number CP1W-CIF41
Type 100Base-TX (Can be used as 10 Base-T )
Applicable Programming Device CX-Programmer version 9.12 or higher
Unit classification CP-series Option Board
Mounting location One slot for a CP-series Option Board
Size of Buffers 8K bytes
Transfer Media access method CSMA/CD
Modulation method Baseband
Transmission paths Star form
Baud rate 100 Mbit/s (100Base-TX) 10 Mbit/s (10Base-T)
However, the internal baud rate between the CPU Unit and the Ethernet
Option Board is 115.2 kbps.
Transmission media • Unshielded twisted-pair (UDP)
cable
Categories: 5, 5e
• Shielded twisted-pair (STP) cable
Categories: 100Ω at 5, 5e
• Unshielded twisted-pair (UDP)
cable
Categories: 3, 4, 5, 5e
• Shielded twisted-pair (STP) cable
Categories: 100Ω at 3, 4, 5, 5e
Transmission Dis-
tance
100 m (distance between hub and node)
Number of cascade
connections
No restrictions if switching hubs are used.
Weight 23 g max.
Dimensions 36.4×36.4×28.2 mm (W×H×D)
17-1-4 Software Configuration
CP-series CPU Unit
FINS
FINS/UDP FINS/TCP
UDP TCP
IP
ICMP
Ethernet (Ver.2.0)
CP1E CPU Unit
Ethernet Option Board
FINS Communication service
Host Link
APR