18 Programming Device Operations
18-18
CP1E CPU Unit Software User’s Manual(W480)
18-4 Connecting Online to the CP1E and
Transferring the Program
This section describes how to make an online connection between the CX-Programmer and the CP1E,
and then transfer a ladder program to the CP1E.
To enable transferring programs from the CX-Programmer to the CP1E, it is first necessary to place the
CX-Programmer online with the CP1E.
Online is the state in which communications is possible between the computer and the CP1E.
18-4-1 Connecting Online
1
Open the project containing the program to be transferred from the CX-Programmer.
2
Select Work Online from the PLC
Menu of the CX-Programmer.
A dialog box to confirm going online
will be displayed.
3
Click the Yes Button.
CP1E
CX-Programmer
Go online and then transfer the program.
To Next Page
Loading...
