18 Programming Device Operations
18-2
CP1E CPU Unit Software User’s Manual(W480)
18-1 Programming Devices Usable with
the CP1E
The Programming Devices that can be used with the CP1E are listed in the following table.
Note 1 To use CX-Programmer version 8.2 with a CP1E CPU Unit, the CX-One version 3 auto-update must be
installed.
2 Use the CX-Programmer version 9.12 or higher, when CP1W-CIF41 is applied.
Precautions for Correct UsePrecautions for Correct Use
• This section describes the unique applications and functions of the Micro PLC Edition CX-Pro-
grammer version 9.03 or higher/CX-Programmer for CP1E. In the remainder of this section,
“CX-Programmer” refers to the Micro PLC Edition CX-Programmer version 9.03 or higher/
CX-Programmer for CP1E.
• When using the full version of CX-Programmer provided in CX-One, refer to the CX-Program-
mer Operation Manual (Cat. No. W446).
• A Programing Console cannot be used for the CP1E. Use the CX-Programmer.
• The CX-Programmer for CP1E and CX-Programmer (CX-One/CX-One Lite) can be used at the same time.
• The CX-Programmer (CX-One/CX-One Lite) and the CX-Programmer for CP1E can be installed on
the same computer and both applications can be run at the same time.
Using Project Files Saved with the CX-Programmer (.CXP) on the
CX-Programmer for CP1E
The CX-Programmer for CP1E cannot open a .CXP project created on the CX-Programmer
(CX-One/CX-One Lite). Use programming from a project saved in a .CXP file on the CX-Program-
mer for CP1E according to the following procedure.
1
Start the CX-Programmer (CX-One/CX-One Lite) and CX-Programmer for CP1E together.
2
Copy the rungs of the program to be used from the Ladder Programming Window of the CX-Pro-
grammer (CX-One/CX-One Lite), and paste them into the CX-Programmer for CP1E.
Additional Information
Files created with the CX-Programmer for CP1E (.CXE) can be opened with CX-Programmer
version 8.2 and higher.
Product Model
Compatible
CX-Programmer
versions
Unit version of
CP1E CPU Unit
Support for
Smart Input
Saved pro-
gram file
extension
Reference
Applicable
CPU Unit
CX-Programmer
(CX-One)
WS02-CXPC
1-V8
Version 8.2 or
higher (See note.)
Version 1. Not
supported
.CXP Refer to the
CX-Programmer
Operation Manual
(Cat. No. W446).
CP1E-20D-
CP1E-30D-
CP1E-40D-
WS02-CXPC
1-V9
Version 9.03 or
higher
Version 1. Supported All units are
supported
Micro PLC Edition
CX-Programmer
(CX-One Lite)
WS02-CXPC
2-V8
Version 8.2 or
higher
Version 1. Not
supported
.CXP Described in this
section.
CP1E-20D-
CP1E-30D-
CP1E-40D-
WS02-CXPC
2-V9
Version 9.03 or
higher
Version 1. Supported All units are
supported
CX-Programmer
for CP1E
WS02-CXPC
3
Version 1.0 Version 1. Supported .CXE CP1E-20D-
CP1E-30D-
CP1E-40D-
To Next Page
Loading...
