17-19
17 Ethernet Option Board
CP1E CPU Unit Software User’s Manual(W480)
17-3 Settings
17
17-3-4 Web Browser Setting Function
Set the IP address table that defines the relationship between FINS node addresses and IP addresses.
With FINS/UDP, this is enabled only when the IP address table method is set to the IP address conver-
sion method.
Set the IP router table when the Ethernet Option Board is to communicate through the IP router with
nodes on another IP network segment.
IP Address Table
Item Contents Default
FINS Node Address Set the node address for the remote device. None
IP Address Set the related IP address for the remote
device.
None
IP Router Table
Item Contents Default
IP Network Address Set the network ID from the IP address. None
Router IP Address Set the related IP address of a router con-
nected to a network.
None
To Next Page
Loading...
