A-75
Appendices
CP1E CPU Unit Software User’s Manual(W480)
A-2 Auxiliary Area Allocations by Address
App
A-2-2 Read/Write Words
A617 00 Built-in RS232C Port-
Communication Set-
tings
Display the present communication
settings of the built-in RS232C
port.Reflect the PLC Setup when
power is turned ON.
Parity
0: Even
1: Odd
Retained See
Function
column.
Refreshed
when power is
turned ON.
01 Parity
0: Yes
1: No
Retained See
Function
column.
Refreshed
when power is
turned ON.
02 Stop bit
0: 2 bits
1: 1 bit
Retained See
Function
column.
Refreshed
when power is
turned ON.
03 Data length
0: 7 bits
1: 8 bits
Retained See
Function
column.
Refreshed
when power is
turned ON.
04 Start bit
0: 1 bit (fixed)
Retained See
Function
column.
Refreshed
when power is
turned ON.
08
to
11
Communication
speed
0 hex: Default (9600)
3 hex: 1200
4 hex: 2400
5 hex: 4800
6 hex: 9600
7 hex: 19200
8 hex: 38400
9 hex: 57600
A hex: 115200
Retained See
Function
column.
Refreshed
when power is
turned ON.
12
to
15
Communication
mode
0 hex: Default (Host
Link)
2 hex: NT link (1: N)
3 hex: Non-protocol
5 hex: Host Link
7 hex: Serial PLC
Link (Slave)
8 hex: Serial PLC
Link (Master)
9 hex: Modbus-RTU
Easy Master
Retained See
Function
column.
Refreshed
when power is
turned ON.
A618 00 SerialOption Port-
Communication Set-
tings
Display the present communication
settings of the serial option
port.Reflect the PLC Setup when
power is turned ON.
Parity
0: Even
1: Odd
Retained See
Function
column.
Refreshed
when power is
turned ON.
01 Parity
0: Yes
1: No
Retained See
Function
column.
Refreshed
when power is
turned ON.
02 Stop bit
0: 2 bits
1: 1 bit
Retained See
Function
column.
Refreshed
when power is
turned ON.
03 Data length
0: 7 bits
1: 8 bits
Retained See
Function
column.
Refreshed
when power is
turned ON.
04 Start bit
0: 1 bit (fixed)
Retained See
Function
column.
Refreshed
when power is
turned ON.
Address
Name Function Settings
Status
after
mode
change
Status at
startup
Write
timing
Related
flags,
settings
Words Bits
To Next Page
Loading...
