2 Preparations
2 - 32
E5@C Digital Temperature Controllers User’s Manual (H174)
z Model Numbers
All E5GC models have universal sensor inputs, so the code in the model number is always “M.”
z Terminal Details
Do not connect anything to the terminals that are shaded gray.
Precautions for Correct Use
When complying with EMC standards, the line connecting the sensor must be 30 m or less.
If the cable is longer than 30 m, the EMC standards will not be satisfied.
z Model Numbers
The number of auxiliary outputs on the E5GC is given in the following location in the model number.
z Terminal Details
Sensor Input
TC (thermocouple)
Pt (resistance
thermometer)
I (current) V (voltage)
Auxiliary Outputs
Code Auxiliary outputs Specification
0 None None
1 Model with 1 auxiliary output SPST-NO, 250 VAC, 2 A
2 Model with 2 auxiliary outputs SPST-NO, 250 VAC, 2 A
Model with 1 auxiliary output Model with 2 auxiliary outputs
E5GC-@@ @ @ @ M-@@@
Sensor input
−
+
KJL
ABB
KJL
mA
−
+
KJL
V
−
+
KJL
E5GC-@@ @ @ @ M-@@@
No. of auxiliary outputs
Auxiliary
output 1
EF
Auxiliary
output 1
Auxiliary
output 2
I
EF
To Next Page
Loading...
