xxv
About this Manual:
This manual describes the E5CN/CN-U/AN/EN Digital Temperature Controllers and includes the sec-
tions described below.
Please read this manual carefully and be sure you understand the information provided before
attempting to set up or operate an E5CN/CN-U/AN/EN Digital Temperature Controller.
•Overview
Section 1 introduces the features, components, and main specifications of the E5CN/CN-U/AN/EN
Digital Temperature Controllers.
•Setup
Section 2 describes the work required to prepare the E5CN/CN-U/AN/EN Digital Temperature Control-
lers for operation, including installation and wiring.
• Basic Operations
Section 3 describes the basic operation of the E5CN/CN-U/AN/EN Digital Temperature Controllers,
including key operations to set parameters and descriptions of display elements based on specific con-
trol examples.
Section 5 describes the individual parameters used to setup, control, and monitor operation.
• Operations for Applications
Section 4 describes scaling, the SP ramp function, and other special functions that can be used to
make the most of the functionality of the E5CN/CN-U/AN/EN Digital Temperature Controllers.
Section 5 describes the individual parameters used to setup, control, and monitor operation.
• User Calibration
Section 6 describes how the user can calibrate the E5CN/CN-U/AN/EN Digital Temperature Control-
lers.
• Appendix
The Appendix provides information for easy reference, including lists of parameters and settings.
!WARNING Failure to read and understand the information provided in this manual may result in per-
sonal injury or death, damage to the product, or product failure. Please read each section
in its entirety and be sure you understand the information provided in the section and
related sections before attempting any of the procedures or operations given.
To Next Page
Loading...
Need help?
General
