7 - 61
7 Digital I/O Slave Unit
GX-series EtherCAT Slave Unit User’s Manual
7-4 Specifications for Each Slave Unit
7
7-4-11 e-CON Connector Type 32-point Input Slave Unit GX-ID3218/ID3228
No. Name Function
(1) Communications connectors
Refer to "6-3 Specifications of Common Areas" in Page 6 - 4.
(2) Unit power supply connector
(3) Status indicators
(4) Node Address setting Switches
(5)
Input indicators
(IN1 0 to 15, IN2 0 to 15)
Indicates the state of an input contact (ON/OFF).
Not lit: Contact OFF (input OFF state)
Lit in yellow: Contact ON (input ON state)
(6) I/O connectors (0 to 15 × 2) Connects an external device.
(7) DIN track mounting hook Fixes a Slave Unit to a DIN track.
To Next Page
Loading...
Need help?
General
