Omron GX-ID1611 User Manual

7 - 53
7 Digital I/O Slave Unit
GX-series EtherCAT Slave Unit User’s Manual
7-4 Specifications for Each Slave Unit
7
7-4-10 e-CON Connector Type 8-point Input and 8-point Output Slave Unit GX-MD1618/MD1628
 Common to input section and output section
 Input section
7-4-10 e-CON Connector Type 8-point Input and 8-point Output Slave Unit
GX-MD1618/MD1628
Specification
Item
Specification
GX-MD1618 GX-MD1628
Internal I/O common NPN PNP
I/O indicators LED display (yellow)
Unit power supply current
consumption
120 mA max. (for 20.4 to 26.4-VDC power supply voltage)
e-CON connector
insertion durability
50 times
Weight 140 g max.
Expansion functions No
Short-circuit protection
function
Available at input section only (Operates at 50 mA/point min.)
Item
Specification
GX-MD1618 GX-MD1628
Input capacity 8 points
ON voltage
15 VDC min. (between each input
terminal and the V terminal)
15 VDC min. (between each input
terminal and the G terminal)
OFF voltage
5 VDC max. (between each input
terminal and the V terminal)
5 VDC max. (between each input
terminal and the G terminal)
OFF current 1.0 mA max.
Input current
6.0 mA max./input (at 24-VDC)
3.0 mA max./input (at 17-VDC)
ON delay 0.1 ms max.
OFF delay 0.2 ms max.
Input filter value
Without filter, 0.5 ms, 1 ms, 2 ms, 4 ms, 8 ms, 16 ms, 32 ms
(Default setting: 1 ms)
Number of circuits per
common
8 points/common
Isolation method No-isolation
I/O power supply method Supplied from unit power supply
Input device supply
current
100 mA/point
I/O power supply current
consumption
10 mA max. (for 20.4 to 26.4-VDC power supply voltage)

Omron GX-ID1611 Specifications

General

Brand	Omron
Model	GX-ID1611
Category	Touch terminals
Language	English