14
GX-series EtherCAT Slave Unit User’s Manual
Some GX-series products comply with UL and CSA standards. If you use an GX-series product that
complies with UL or CSA standards and the machinery or system in which you use the GX-series prod-
uct must also comply with the standards, refer to the Instruction Sheet that is provided with the product.
The Instruction Sheet provides the application conditions for complying with the standards.
Some GX-series products comply with shipbuilding standards. If you use an GX-series product that
complies with shipbuilding standards and the machinery or system in which you use the GX-series
product must also comply with the standards, consult with your OMRON representative. Application
conditions are defined according to the installation location. Application may not be possible for some
installation locations.
Some GX-series products comply with KC standards.
Observe the following precaution if you use GX-series products in Korea.
Class A Device (Broadcasting Communications Device for Office Use)
This device obtained EMC registration for office use (Class A), and it is intended to be used in places
other than homes. Sellers and/or users need to take note of this.
Conformance to UL and CSA Standards
Conformance to Shipbuilding Standards
Conformance to KC Certification
To Next Page
Loading...
Need help?
General
