Omron GX-ID1611 User Manual

A - 83
A Appendix
GX-series EtherCAT Slave Unit User’s Manual
A-7 Version Information
A
A-7 Version Information
The following table shows the correspondence between the unit version of each EtherCAT Slave Unit
model and the compatible version of Support Software.
If you use your EtherCAT Slave Unit with the corresponding version or a higher version of Support
Software, all the functions supported by the unit version of the EtherCAT Slave Unit are available.
Refer to Version Upgrade Information on page 16 for details on the functions that have been added or
changed due to the unit version upgrade of the EtherCAT Slave Units.
EtherCAT Slave Unit
model
Unit version
Compatible version of Support Software
Sysmac Studio Cx-ConfiguratorFDT
GX-ID Ver.1.2 Ver.1.25 −
Ver.1.1 Ver.1.01 −
Ver.1.0
GX-OD Ver.1.2 Ver.1.25 −
Ver.1.1 Ver.1.01 −
Ver.1.0
GX-OC Ver.1.2 Ver.1.25 −
Ver.1.1 Ver.1.01 −
Ver.1.0
GX-MD Ver.1.2 Ver.1.25 −
Ver.1.1 Ver.1.01 −
Ver.1.0
GX-AD Ver.1.2 Ver.1.25 −
Ver.1.1 Ver.1.01 −
Ver.1.0
GX-DA Ver.1.2 Ver.1.25 −
Ver.1.1 Ver.1.01 −
Ver.1.0
GX-EC Ver.1.2 Ver.1.25 −
Ver.1.1 Ver.1.01 −
Ver.1.0
GX-ILM Ver.1.2 Ver.1.25 Ver.2.2
Ver.1.1 Ver.1.20 Ver.2.2
Ver.1.0 Ver.1.16 Ver.2.2

Omron GX-ID1611 Specifications

General

Brand	Omron
Model	GX-ID1611
Category	Touch terminals
Language	English