15
GX-series EtherCAT Slave Unit User’s Manual
Related Manuals
The following manuals also deal with EtherCAT. Refer to them for details.
Man No. Name of manuals Contents
W488 GX-series EtherCAT Slave Units
User’s Manual
Describes part names, functions, installation, and wiring
and also provides tables of specifications and objects for
the GX-series IO-Link Master Unit (W488-E1-05 or later).
Also describes the hardware, setup methods, and func-
tions of the EtherCAT Remote I/O Terminals.
W505 NJ/NX-series CPU Unit Built-in
EtherCAT
® Port User’s Manual
Explains the built-in EtherCAT port.
An overview is provided and the configuration, functions,
and setup are described.
W562 NY-series IPC Machine Controller
Industrial Panel PC / Industrial
Box PC Built-in EtherCAT® Port
User’s Manual
Information on the built-in EtherCAT port is provided.
This manual provides an introduction and provides infor-
mation on the configuration, features, and setup.
W503 NJ/NX-series Troubleshooting
Manual
Concepts on managing errors that may be detected in an
NJ/NX-series Controller and information on individual
errors are described.
W564 NY-series Troubleshooting Man-
ual
Concepts on managing errors that may be detected in an
NY-series Controller and information on individual errors
are described.
W504 Sysmac Studio Version 1 Opera-
tion Manual
Explains the operating procedures of the Sysmac Studio.
W570 IO-Link System User’s Manual Provides an overview of IO-Link Systems and explains the
system configuration, communications specifications, com-
munications methods, I/O data, parameters, models, Sup-
port Software, and troubleshooting.
Refer to the following manuals for the individual IO-Link
Master Units for hardware information and specifications
specific to each Master Unit and a list of the objects for
each Master Unit.
NX-series IO-Link Master Unit: W568
GX-series IO-Link Master Unit:W488-E1-05 or later
W567 NX-series IO-Link Master Unit
User’s Manual
Describes part names, functions, installation, and wiring
and also provides tables of specifications and NX objects
for the NX-series IO-Link Master Unit.
To Next Page
Loading...
