3-205
3 Functions of NB-Designer
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
3-7 Function Parts
3
3-7-3 Alarm Display
Alarm Display icon can be used to display the triggered preset alarm information by using the
Neon Lamp in the area where the Alarm Display locates. The alarm information must be related to node
address of a certain bit, and it will scroll from the right to the left when the bit address is triggered to the
alarm state. The alarm information will continue to scroll until this bit address is switched to the non-
alarm state. The alarm information must be logged in the [Alarm Setting] database in advance. (This
component only displays the alarm information, and the component to be displayed must be logged in
the [Alarm Setting] database).
3-7-3 Alarm Display
To Next Page
Loading...
