3-7
3 Functions of NB-Designer
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
3-2 Menus
3
3-2-1 File Menu
3-2 Menus
There are various kinds of menus in NB-Designer. You can set the object, graphics, chart, macro, data
block etc, and create the screen data displayed on the NB Unit. The pull-down menu list and the
purposes of each item are as follows.
New
Select [New] in the [File] menu or icon to create a new project.
A new project is created when you press [OK] after inputting the project name.
Open
Select [Open] in the [File] menu or icon to open an existing project.
Select the project file to be opened, and press [Open] or double click this project file.
3-2-1 File Menu
To Next Page
Loading...
Need help?
General
