3 Functions of NB-Designer
3-300
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
The security level is classified into 16 levels (0 to 15) in the NB-Designer. One 8-digit number password
can be set for each level at the request of the users, and the greater the level number, the higher the
level. 15-level is the highest and 0-level is the lowest. When the security level is 0, it means no
password. 0 can’t be used for setting the password.
Number of Security Levels is 3 by default in PT Property, and it can be opened to 16 levels in the
Security Levels Setting tab.
After the security level password is set, the user can use each group of specified passwords to perform
screen and component managements. For example, after the screen security level is set to “2”, the
screen can be switched to by inputting the user password; otherwise this screen can’t be entered during
the operation.
3-10-5 Security Levels Setting
To Next Page
Loading...
Need help?
General
