3 Functions of NB-Designer
3-230
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
2
According to the order to be executed, change the position of the action which was added.
Right-click the Action List to select [Move Up] or [Move Down] option to change the execution
order of the component.
3
In order to delete the action which was added, right-click the Action List to select [Delete]
option to delete this component.
4
Edit the Property of the Action.
The Property of the Action which was added (Bit Set and Word Set) can be set for each Action
at the right area in the [Basic Properties] tab.
To Next Page
Loading...
