[ SYSTEM MENU ]
Quit
Transmit Mode
Maintenance Mode
[ MAINTENANCE MENU ]
Quit
PT Setting
I/O Check
DIP-SW Status
Init. Memory
Memory Switch
[ I/O CHECK MENU ]
Quit
LED Check
Buzzer
LCD Display
Comm. Check
Touch Switch
Data Memory
104
System Maintenance
Section 3-9
Checking the Buzzer Check the NT20S buzzer by using the menu operation from the System Menu as
mentioned below.
Select “Maintenance Mode”.
Select “I/O Check”.
Select “Buzzer”.
S If the buzzer function is normal, the continuous buzzer sound will be made.
S To stop the buzzer, press “EXIT” touch switch in the buzzer check screen. The
NT20S will enter the I/O CHECK MENU.
Reference: Though memory switch setting for the buzzer has been made for OFF, the buzzer
will sound when the buzzer check is executed.
To Next Page
Loading...
