To Next Page

To Previous Page

[ SYSTEM MENU ]

Quit

Transmit Mode

Maintenance Mode

[ MAINTENANCE MENU ]

Quit

PT Setting

I/O Check

DIP-SW Status

Init. Memory

Memory Switch

Comm. Type

Key Sound

Buzzer Sound

Host Link

OFF

Bk light Off

Tool Mode

OFF

None

NT20M

(1/2)

Quit

WRT&

EXIT

MEMORY SW MENU

Page

Setting the Conditions of Communications with the PC/Host by Using the Memory Switches

Section 3-5

3-5-5 Selecting the Automatic Reset Function

The “Automatic Reset” memory switch is used to set whether or not the commu-

nication is automatically reset after the occurrence of a communication error.

The factory setting has been made at “No”.

Select the baud rate of the communication with the PC by the menu operation from

the System Menu as mentioned below.

Select “Maintenance Mode”.

Select “Memory Switch”.

Select “Page”.

Omron NT20S User Manual

Questions and Answers: