Omron NT20S - Page 96

Buzzer Sound
Bk light Off
Automatic Reset
ON
10min
Yes
Key Press Sound
ON
Quit
WRT&
EXIT
Stop Bits
Parity Check
Flow Control
1bit
Even
Baud Rate
LMP Bit Control
RS/CS
19200bps
Enable
Data Bits
8bits
Quit
WRT&
EXIT
Page Page
77
Setting the Conditions of Communications with the PC/Host by Using the Memory Switches
Section 3-5
[NT20S-ST128 RS-232C]
S Key Press Sound 3-8 Various System Settings (page 91)
S Buzzer Sound 3-8 Various System Settings (page 92)
S Backlight Off 3-8 Various System Settings (page 94)
S Automatic Reset Selecting the Automatic Reset Function (page 84)
S Data Bits Setting RS-232C Communication Conditions
(page 82)
S Stop Bits Setting RS-232C Communication Conditions
(page 82)
S Parity Check Setting RS-232C Communication Conditions
(page 82)
S Flow Control Setting RS-232C Communication Conditions
(page 82)
S Baud Rate Setting RS-232C Communication Conditions
(page 82)
S LMP Bit Control 3-8 Various System Settings (page 97)